Open the top cover, then place the feeding tray into the feeder from the front. For your pet's health, please wash the grain bucket and feeding tray regularly.
Rotate the knob on the top cover. The feeding tray is in the grain bucket. Place the feeding tray into the feeder from the front, then pour pet food into the ...
Use the end of a paperclip to press and hold the reset/ reboot button for 3-5 seconds until the LED blinks white to show a successful reboot.
If the feeder successfully reconnects to your Wi-Fi with internet, the LED will blink blue and then turn solid showing it is fully connected and operational.
To Set Time: 1. After powering feeder, the LCD will show a blinking 12 for time format setup.Use UP or DOWN buttons to scroll to select 12 hour or 24 hour time format.Press RIGHT button to set time.
Clean the feeder. Replace the batteries with four, new D-cell alkaline batteries. Important: Use only alkaline batteries in the feeder. Press the sleep button on the back of the feeder to resume the programmed feedings.
If your feeder has a flashing light indicating that it is offline, the feeder will continue to feed as previously scheduled if it has power. Verify home internet is working. If other wireless devices have also lost connection, consider resetting your router and/or contacting your internet service provider.
Reset the feeder to factory settings, holding down the Add Pet ( ) button for 10 seconds (until the light starts alternating red / green and the lid opens and closes).
If the router or internet is not working, try resetting the router or contact your internet provider. Power cycle the feeder by turning off the power switch.Wait 10 seconds and turn the power switch back on. Check for other devices near the feeder that use the internet or other wireless signals (such as a microwave).
The buttons lock after 2 minutes of inactivity. The lock icon on the screen indicates that the buttons are locked. Press the center and up button at the same time to unlock the buttons.
Blue Blinking Fast Feeder is trying to connect to Wi-Fi or is offline. Blue Solid Feeder is connected to Wi-Fi with internet and fully operational. White Blinking Reboot mode which triggers the feeder to attempt to reconnect to your Wi-Fi without losing the programmed settings.
How Do I Know if My Petsafe Transmitter is Working? The PetSafe transmitter has two indicator lights.One that shows a power supply and the transmitter is working correctly.And the other shows the complete fence boundary line.
Next, some automatic pet feeders may continue to dispense food even if it is not being eaten, which can lead to overflow or messiness. Some of these feeders may easily tip over if bumped, which can result in food spilling out. Automatic pet feeders only work for dry food diets.
Click Add Device or + to add a new pet feeder. Choose the Add manually tab and select Wi-Fi Pet Feeder.Select 2.4 GHz Wi-Fi Network and enter password.
The Smart Pet Feeder can be reset by pressing and holding the 'feed' button for 5 seconds until a sound is heard. A reset will erase all settings and data on the Smart Pet Feeder and return it to its original factory settings.
Press and hold reset button for 7 seconds until the blue light flashes to enter pairing mode. Geeni app should locate the smart feeder in no time. Use pet feeder in a dry indoor environment only.
Address: 569 Waelchi Ports, South Blainebury, LA 11589
Phone: +9958996486049
Job: Sales Manager
Hobby: Web surfing, Scuba diving, Mountaineering, Writing, Sailing, Dance, Blacksmithing
Introduction: My name is Prof. Nancy Dach, I am a lively, joyous, courageous, lovely, tender, charming, open person who loves writing and wants to share my knowledge and understanding with you.
We notice you're using an ad blocker
Without advertising income, we can't keep making this site awesome for you.
